Foam Proportioning Systems & Equipment
Bladder Tank Foam Proportioning System
Description
  • Vertical or Horizontal unit
  • Maximum working pressure 12 Bar (175 PSI)
  • Carbon Steel or Stainless Steel Construction
  • Tank made to ASME Code Section VIII Div I
  • ASME U Stamp available as an option
  • Capacity up to 15,000 liters (4000 gal.)
  • Compatible with all foam concentrates
  • Nylon reinforced Buna-n-rubber bladder
  • Proportioner pre-piped on to the tank
  • Bladder Tank filling kit provided if required
  • UL Listed and FM Approved
Download
Bladder Tank Foam Proportioning System
Bladder Tank with pre-assembled Deluge Valve
Description
  • Vertical or Horizontal unit
  • Maximum working pressure 12 Bar (175 PSI)
  • Carbon Steel or Stainless Steel Construction
  • Tank made to ASME Code Section VIII Div I
  • ASME U Stamp available as an option
  • Capacity up to 15,000 liters (4000 gal.)
  • Compatible with all foam concentrates
  • Proportioner & Deluge Valve pre-piped on to the tank
  • UL Listed Bladder Tank, Proportioner and Deluge Valve
Bladder Tank with pre-assembled Deluge Valve
Ratio Controller
Description
  • Wafer Type or Flanged Connection
  • 80, 100, 150 & 200 mm size (3", 4", 6" & 8") with flow from 270 to 18500 lpm (71 to 4887 gpm)
  • Used with Bladder Tank or Inline Balance Pressure Proportioner for variable flow
  • Caters to 3% or 6% induction simply by changing orifice
  • Service Pressure : Maximum 3 to 14 bar (44 to 200 psi)
  • UL Listed and FM Approved (Refer to product catalogue HD263 for details)
Download
Ratio Controller
Foam Concentrate Control Valve
Description
  • 40 and 50 mm (1½" & 2" ) size
  • Stainless steel material
  • Hydraulically controlled
  • Working pressure 3.5 to 12 bar (50 to 175 psi)
  • Suitable for Bladder tank and Inline balance pressure proportioning system
Download
Foam Concentrate Control Valve
Inline Balance Pressure Foam Proportioner
Description
  • Bronze or Stainless steel material with SS / Brass trims
  • 80, 100, 150 & 200 mm size (3", 4", 6" & 8") with flow ranging from 270 to 18500 lpm
  • Working pressure 3.5 to 14 bar (50 to 200 psi)
Download
Inline Balance Pressure Foam Proportioner
Inline Foam Inductor
Description
  • Aluminium, Bronze or Stainless steel construction
  • 65, 80, 100 & 150 mm (2.5", 3", 4" & 6") size with fix flow of 75 to 3500 lpm
  • Working pressure 6.4 to 12 bar (93 to 175 psi)
  • Maximum back pressure as 65%
  • Each unit is calibrated and factory tested for flow, induction rate at maximum back pressure
Download
Inline Foam Inductor
Portable Inline Foam Inductor
Description
  • Bronze or Stainless Steel construction
  • 65 mm (2.5”) size with fixed flow of 225 or 450 lpm
  • Inlet pressure: Calibrated at 7 or 12 kg/cm2
  • Yellow Finish
  • FM Approved with HD AFFF3% and AR-AFFF 3X3% FM Foam Concentrate
Download
Portable Inline Foam Inductor
Atmospheric Foam Concentrate Storage Tank
Description
  • Horizontal unit
  • Made up to 15000 liter (4000 Gal) Storage capacity
  • Stainless Steel 304/316 material
  • Comes with ladder, sight glass and air vent
  • Expansion dome of 2% tank capacity
  • Flat end or dome end
  • Natural, Custom or Red RAL 3000 epoxy painted
  • Tank can be custom made with inline inductor mounted on the tank
Download
Atmospheric Foam Concentrate Storage Tank
Foam Chambers
Description
  • Sizes: 65NB, 80NB and 100NB
  • Flow from 100 to 1800 LPM (26 to 476 GPM)
  • Carbon Steel or Stainless Steel material
  • Working pressure 2.8 to 7 Bar (40 to 100 PSI)
  • Epoxy painted from inside and outside
  • Supplied with Stainless Steel orifice plate
  • Frangible glass vapour seal
  • Solid or split deflector
  • UL Listed and FM Approved
Download
Foam Chamber Model FCA & FCA-S
Rim Seal Foam Pourers
Description
  • Rim Seal Pourer is designed to discharge foam gently as it expands and slides down inside of the tank shell and directly in the rim seal area
  • Model RPA & RPA-S
  • Size 65 NB
  • Carbon Steel or Stainless Steel Construction
  • Epoxy painted from inside and outside
  • UL Listed
Download
Rim Seal Foam Pourer Model RPA & RPA-S
Foam Makers
Description
  • Size: 50 & 65 NB ( 2” & 2.5” )
  • Flow 75 to 550 LPM
  • Carbon Steel or Stainless Steel construction
  • Working pressure 2.8 to 7 Bar (40 to 100 PSI)
  • Epoxy painted from inside and outside
  • Supplied with Stainless Steel orifice
  • UL Listed
Download
Foam Maker Model FMA & FMA-S
Foam Pourers for Foam Makers
Description
  • Size: 50, 65, 80 NB (2”, 2.5” & 3”)
  • Flow 80 to 1400 LPM (21 to 370 GPM)
  • Carbon Steel or Stainless Steel construction
  • Working pressure 2.8 to 7 Bar (40 to 100 PSI)
  • Epoxy painted from inside and outside
  • Supplied with Stainless Steel orifice
  • Choice of various pourers
Download
Foam Pourers for Foam Maker
Foam-Water Sprinklers
Description
  • Air aspirating type
  • Brass or Stainless Steel Material
  • Size: 1/2" BSPT / NPT
  • Working pressure 2.0 to 4.0 bar (30 to 60 psi)
  • K - Factor 42
  • Pendent mounting
  • UL Listed
Download
Foam-Water Sprinklers
Foam Branch Pipe
Description
  • Hand held foam branch pipe designed for long range performance
  • Model BP225 and BP450
  • Size: 60 NB with 2.5” Male Instantaneous Coupling at Inlet
  • Aluminium Construction
  • Epoxy Painted – Yellow Finish
  • FM Approved (Refer to product catalogue HD196 for details)
Download
Foam Branch Pipe
Foam Concentrate By Pass Valve
Description
  • Bronze or Stainless steel construction
  • 40 & 50 mm (1.5" & 2" ) size
  • Female BSP end connection
  • Suitable for use in Balance Pressure Foam Proportioning System
Download
Foam Concentrate By Pass Valve
Skid Mounted Balance Pressure Foam Proportioning System
Description
  • Compact skid mounted unit with Foam Concentrate Pump, Ratio Controller, By-pass Valve, Relief Valve, Electricals etc
  • Offers wide range of flow from 270 to 18500 lpm (71 to 4887 gpm) without any need for manual adjustment
  • Ready to hook up to the system
Download
Skid Mounted Balance Pressure Foam Proportioning System